2. Make sure that all of your components are compatible with one another; otherwise, you could end up with items that you can’t use.

3. Purchasing stereo components used is a good way to get a better system for your money.

4. You can often find great stereo components on sale at mass market retail stores; just look for reliable brands when shopping in these places.

5. Reading online reviews is a good idea if you are comparing different components and trying to decide what you want.

6. Buying stereo components online is a good option, and it’s also incredibly convenient for you if you are busy or simply don’t like shopping at traditional stores.

7. The cords and wires that you purchase for your stereo system really do make a difference, so don’t skimp on quality if you can help it.

8. You can sometimes find money-saving coupons, coupon codes and more by searching online and in local sales flyers, so consider using them to save cash on your home stereo components.

9. You can sometimes find good components for a lot less than you would normally pay for them by shopping at pawn shops and even yard sales.

10. Don’t forget to spring for a warranty if possible; it will be worth it if your components get messed up.

The first thing you should do is find out what size of audio components will fit into your car, without the need for a lot of customization. Some times the best way to get this information is to purchase your new car with the standard system. Then you can have the main parts of the system removed and measured. The speakers will already be hard wired into your car. You may choose to use them in addition to added speakers, or you may decide to leave them unconnected.

After you have the dimensions for your aftermarket audio system, you can check for matching equipment. By using this way of making your selection you have accomplished at least two important things. Your car now has a better sound system and the installation appears like a stock system on the car. This helps discourage criminals from taking your new car sound system.

If you’re ready to give your car an audio makeover, it’s important to do your homework to ensure you’re getting the ideal system and the most bang for your buck.

The first thing you should do is make a list of the features that you want in your car stereo system. If you’re simply looking to enhance the audio quality, you should consider looking for speakers, subwoofers, amplifiers and a crossover. If you’re looking for more, Bluetooth, remote controls, navigation and USB ports are all convenient features you can add to your system.

Once you have an idea of which features you want, you need to determine whether your current stereo system should be upgraded or completely replaced. This will depend largely on the make, model and year of your vehicle, as many systems in newer automobiles can be easily upgraded with expansion components.

Once you’ve taken everything into consideration, you have to set a budget and make a list of all the equipment you’re planning to purchase. Also, don’t forget to factor in the cost of installation, which will vary depending on the size of the job.

1. Before you embark on installation make sure that the new head unit is going to fit into your dashboard. How disappointing and inconvenient to get your new toy into the car only to find that it doesn’t quite fit. Check out the accessories that come with the head unit, they may offer a mounting kit that is custom made for your car.

2. To ensure that you get the best system for your money don’t be afraid to ask around about it’s quality. You may be surprised to find that the 500watt system you were about to purchase sounds more like a 100watt.

3. Do yourself and your car a favor and skip the duck tape. Of all the wonderful things duct tape can be used on wires isn’t supposed to be one of them. You’ll encounter less problems later if you spend the extra buck on a roll of electrical tape, after all that is what it was made for.

4. This next tip is extremely simple but so many people forget to see it through. Do not, I repeat do not forget to disconnect the ground or negative cable from your car battery. Receiving a nasty shock should not be on the list of things to do for your day.

5. Determine the best place in your car to run all the wiring before hand. One of the worst things that could happen is if it is crimped or disturbed at some point then you’ll have to check every connection again when the connection is no longer there.

6. When running the power wires and the RCA’s, make sure that you separate them properly. If this isn’t done correctly there is a chance you could end up getting some engine noise from inside your speakers.

7. If in the event that you are also installing speakers with your head unit run your wires a little bit long. Long wires can always be trimmed and shortened but if you end up not having enough wire you’ll have to rewire the entire thing.

8. Make sure that install an inline fuse protector. It may cost a little more up front but it will save you a ton of money in the end.

9. To increase the sound and performance of your new system you may want to look into sound damping your doors and your dash. This will decrease the rattles and vibrations that are allowed to travel through the car and reduce the extra noise associated with high base.

10. Last but not least don’t be afraid to ask for help from family or friends if you run into a problem during the install. They might also have some incredibly helpful tips that could save you time and money.

Tip 1 – It’s important to install at least five speakers to get the full experience that a sound system can offer.

Tip 2 – The sound system reciever should be placed near the television for easy access.

Tip 3 – Research the types of equipment to ensure that you find the sound system that is best for you.

Tip 4 - Wireless speakers will save you the job of having to install all of the wires of a non-wireless.I found some more information here.

Tip 5 – Installing sound system is very time consuming and complicated, so you may want to hire a professional.

Tip 6 – If you want a speaker that is close to the television make sure that it is one that is magnetically shielded. That way it does not distort the picture of your television.

Tip 7 – Speaker placement is important for the quality of the sound, so make sure that you plan ahead.

Tip 8 – Take the shape and size of the room into consideration before buying a sound system.

Tip 9 – Set yourself a realistic budget.

Tip 10 – Never buy the first sound system that you find.

Follow these tips, to ensure that you get the best experience from your sound system.

1. The most important and necessary all mighty remote. How you can you have the best sound in the world without a remote so you don’t have to move?

2. Stands for the speakers that are stylish and cool are always great. They keep them off the floor or walls and add a bit of style to your sound system.

3. The ability to make calls through your sound system is always cool. This is one accessory I would definitely get.

4. Great chairs and seating is a must. Why have all that nice sound if you can’t be comfortable?

5. One of the most important things to get is a projector screen and projector. If you are going through all the trouble of a home theater system you should get the best screen possible!

These small speakers pack a powerful punch, and they can trump the sound quality of any other speaker, which is more than double its size. You will find that these speakers eliminate static and background noise, and they offer quality control, even when you crank up the volume as loud as it can get. So, rather than go with the biggest speakers you can find in stores, instead turn to the smallest package, and cosider Bose when you are looking for the best sound, and the true home surround sound system.